How to set up FMS with your 4ch Transmitter

Post new topic Post reply

Author Message
ricky23432
New Pilot





Joined: 06 Jan 2008
Posts: 19
Country of choice:
Location: london

Post Posted: Mon Jul 21, 2008 10:50 pm
Post subject: How to set up FMS with your 4ch Transmitter
Quote 
Controller Unit Version:

1. Install the FMS software following the on screen instructions
2. Plug cable into your USB port.
3. Wait for windows to detect and show 'installing new hardware' message.
4. When complete, unplug the USB cable then re-insert.
5. Open the FMS program.
6. Go to Controls > Analogue Control > Joystick interface > Mapping/Calibration
7. Set the mapping as shown below

8. Click 'Calibrate' button and move sticks in circular motion - then centre them.
9. Click Finish and Ok
10. Choose a helicopter model from the models menu and start flying!

The left stick should now move the heli up/down and turn left/right (ie. stick
pulled left moves nose left - forward stick moves heli upwards).

The right stick should tilt the heli side to side and back/forward (ie.
forward tilts nose down - pulling stick right tilts heli to right).

(These settings apply to mode 2 transmitter set-ups)

USB Lead Version:

1. Install the FMS software following the on screen instructions
2. Switch on transmitter (with batteries loaded).
3. Plug cable into back of Tx and into your USB port.
4. Wait for windows to detect and show 'installing new hardware' message.
5. When complete, unplug the USB cable then re-insert - the red light on plug should now flash rapidly.
6. Open the FMS program.
7. Go to Controls > Analogue Control > Joystick interface > Mapping/Calibration
8. Set the mapping as shown below (for Honey Bee transmitter).



If using the Robins 22 transmitter: NO Inv boxes are ticked.
If using the CP2 sim cable: Tick channel 3 Inv boxes only.

9. Click the 'Calibrate' button and move sticks in circular motion - then centre them.
10. Click Finish and Ok
11. Choose a helicopter model from the models menu and start flying!



enjoy!
_________________
Current Helis:

Esky: HoneyBee FP
Esky: Lama v3
_____________________

The "heliguy" car!
http://www.heliguy.com/Forum/the-heliguy-car-final-design-t34436.html
Back to top Profile Private Message
Thankful People
2 user(s) is/are thankful for this post.
Display posts from previous:  
Board Alert Board Message
There are 6 posts in this topic to view if you are logged in.

Why Register?

  • Your details are kept secure and private.
  • Heliguy.com will not share your details
  • You can unsubscribe at any time
PM Earlgrey for any forum queries.

Login here and be redirected to this Topic Register

Similar Topics

Topic Last Poster Forum Replies Posted
Transmitter problems Chriswick HoneyBee CP3, mods, upgrades and older models. 0 Fri Jul 18, 2014 1:37 pm View latest post
For Sale - Spektrum DX8 Transmitter G... stevebaker Special Requests 0 Tue Jun 17, 2014 9:38 pm View latest post
dx7 transmitter and flasher 450 airfr... paulcobra Special Requests 0 Sat Jun 07, 2014 2:03 pm View latest post
Receiver Transmitter Query randalsh Radio Receivers 12 Tue May 06, 2014 6:59 am View latest post
Phantom 2 Transmitter Fault! noiseboy72 DJI Phantom 0 Sun Apr 06, 2014 4:48 pm View latest post
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

heliguy illustration

Phoenix Flight Simulator

Heliguy on FaceBook

Spektrum DX8

RC Helicopter

Feed