E-flite BLADE CX2 3-in-1 control unit led what do they mean?

2 posts   •   Page 1 of 1
anybodyRELLIK
New Pilot
 
Posts: 1
Joined: Tue May 17, 2011 6:05 pm

E-flite BLADE CX2 3-in-1 control unit led what do they mean?

by anybodyRELLIK » Tue May 17, 2011 6:33 pm

i have a blade cx2 and the 3-in-1 control unit led lights keep flashing from red to green. i have no clue what means can you guy help

jimob23
New Pilot
 
Posts: 10
Joined: Tue Jan 18, 2011 11:15 am
Location: Ware -Hertfordshire

CX2 LED

by jimob23 » Tue May 17, 2011 6:57 pm

The led will initially flash green while the bind process is undertaken .It will then turn solid after the bind has been sucessfull . It will normally remain solid green when flying and may sometimes turn red when the throttle is on maximum . This is an indication the 3 in 1 is requiring more power the battery can supply . It is not a problem but if it starts to happen at lower throttle openings it can indicate something is binding but normally it is that the battery has started to loose power and is a good indication to land before you flatten the battery causing possible subsquent charging problms :D
Blade CX2
MSR
MSR2
120SR
450 SE v2 -Still in the hanger
Phoenix
DX6ti

2 posts   •   Page 1 of 1

Who is online

Users browsing this forum: No registered users and 0 guests

It is currently Sun Aug 30, 2015 6:48 am